What's new on TheAeroSmith's "Photo Albums" pages RSS

Recently created and updated albums:

Dremel 580-02 Table Saw Manual
Please see most current info on the Dremel pages at www.theaerosmith.com


A copy of the Dremel table saw manual is below and can be printed from Fotki. You may also download a .PDF copy here:


https://www.dropbox.com/s/13x4joipx7hsqbe/Dremel%20580-02%20manual.pdf?dl=0

You'll have to copy and paste the link.


The 580 is identical to the 580-02 except for the motor shaft sizes and nameplate colors so the manual covers both.



There are SEAMLESS belts available now, available from zimbyoproducts.com. These have gotten good feedback to me from quite a few people. Personally, I haven't used them because I converted my saw to use O-rings for drive years ago when there weren't any belts available. The owner's name is Pete Wells. Please provide feedback about your experience with them. I understand he sells blades, too. A link to him is on my site at www.theaerosmith.com


For more about the saw, where to buy blades, belts, etc, look under The Mighty Dremel Table Saw at www.theaerosmith.com

Carbides blades are a HUGE improvement to the saw; be certain to get them if you don't get anything else for yours. MicroMark has them, expensive, but very fine. Harbor Freight just discontinued selling ones I've recommended for years and years at far less and every bit as good.

Since Harbor Freight just discontinued theirs, very disappointing, I searched and searched, and found a source here in the US that has just excellent blades. You have to buy them in large quantity, so I decided I'd buy them and make them available one at at time to people who contact me about the manual I give away.. They're imported as are MM and HF (I WISH I could find US made...) but these are EXCELLENT, better than either the MicroMark or Harbor Freight blades at half the cost of the MM blades. Drop me a note for details or go to www.theaerosmith.com

February 2012: I just added a new page, DREMEL ACCESSORIES. On it there are several items being made by Bill Wilson, a retired machinist in Florida. The stuff is really nice and quite reasonably priced. The miter gage and rip fence are HUGE improvements over the stock stuff. The vacuum dust shield is a big improvement to the machine, too. Be sure to check that page...get these things before he stops making them...it's just a hobby for him, and lucky for us that he's making the stuff available.

See it all at www.theaerosmith.com Click on the Dremel saw pages.

Reach me here:

Bob@theaerosmith.com
Album was created 11 years 11 months ago and modified 2 years 11 months ago
8 comments
0 views
0 visitors
16 files
view album | view roll | add to cart
Scale Staffel 1980's Indoor Meet
Album was created 8 years 10 months ago and modified 5 years 10 months ago
No comments
0 views
0 visitors
16 files
view album | view roll | add to cart
Tom Wilson's photos
Album was created 8 years 10 months ago and modified 5 years 11 months ago
No comments
0 views
0 visitors
63 files
view album | view roll | add to cart
Perris 49r meet Mid 1980's
Album was created 8 years 10 months ago and modified 8 years 10 months ago
No comments
0 views
0 visitors
5 files
view album | view roll | add to cart
More Tom Wilson-Elsinore Scale ROW
Album was created 8 years 10 months ago and modified 8 years 10 months ago
No comments
0 views
0 visitors
17 files
view album | view roll | add to cart
BP covers
These are the simple steel sheet metal covers I bent-up. The front edge has a piece of sheet soldered in place to form a piece going down. The table has some thin magnets on the front edge to keep the covers in place.
Album was created 11 years 7 months ago and modified 11 years 7 months ago
No comments
0 views
0 visitors
1 files
view album | view roll | add to cart
Twin engine Soap Box Derby tether car.
(Jun 16, 2006)
A couple of shots of the new Cox .020 twin engine Soap Box Derby Racer. The car is
6½" overall length.

Questions?

Bob@theaerosmith.com
Album was created 11 years 7 months ago and modified 11 years 7 months ago
No comments
0 views
0 visitors
2 files
view album | view roll | add to cart
Grandmother's cigarette/music box restored
Ths is a short series of photos of my mother's old music box from 1948. May 2006 I decided to give it a little TLC, and save it for a birthday or promotion present for daughter Ashley.
Album was created 11 years 8 months ago and modified 11 years 8 months ago
No comments
1 views
1 visitors
8 files
view album | view roll | add to cart